Electroforming Nickel Sticker Label

Electroforming Nickel Sticker Label

Process of Electroforming Nickel Sticker Label

The process flow of Electroforming Nickel Sticker Label electroplating nickel is relatively simple, mainly including five steps: preparation, pretreatment, electroplating, post-treatment and quality inspection.

• Preparations

First of all, it is necessary to prepare metal plating equipment and tools such as electroplating tank, electrolyte, anode, cathode and power supply, as well as nickel salt solution and chemical additives.

• Preprocessing

Pretreatment steps usually include surface cleaning, pickling, degreasing and electrolytic deposition, etc. These steps remove oil, scale and other impurities from the surface and improve the adhesion between the nickel layer and the substrate.

• Electroplating

Under the action of electrolyte and power supply, metal ions are gradually deposited on the surface of the cathode and form a uniform nickel film. In this process, it is necessary to control the change of the current density and the concentration of metal ions in the electrolyte to obtain the desired electroplating effect.

• Post-processing

After the electroplating is completed, some post-processing steps are required, including removing the residual electrolyte on the surface, drying and baking the nickel layer, etc. This ensures that the surface of the nickel layer is smooth and even and not prone to peeling off.

• Quality inspection

Quality inspection is an essential step in the nickel plating process, usually including visual inspection, thickness measurement, durability test and salt spray test, etc. Only by passing these strict quality inspections can we ensure the high quality of electroplated rice products.

Application

Production Process

Our Sample Room