3D Holographic Tamper Proof Stickers

3d Holographic Tamper Proof Stickers

You might be wondering how these 3D Holographic Tamper Proof Stickers are made? And why most people prefer to use their own logo in holographic images. In the following introduction, Richi will answer you one by one.

Learn how to make 33D Holographic Tamper Proof Stickers in six steps?

Making holographic stickers requires advanced holographic equipment and professional technicians, which is difficult for counterfeiters to imitate. The device can record high-resolution optical images and is the most important process for making holographic stickers.

As a first step, you need a lattice holographic device, which helps to etch the optical image. The shooting range of the dot matrix system is from 150×150 to 800×1000. The shooting accuracy is up to 2450dpi, and high-resolution holographic images can be recorded.

Optical images can be generic designs or come from your own custom information such as logos, company names, graphics, etc. As a holographic sticker manufacturer with more than ten years of experience, our company is very professional in making your own holographic stickers.

In the second step, an electroforming system is used to obtain a nickel holographic master. First put the PC sheet with the optical image into an electroforming tank with a volume of 2000L, and then adjust the temperature to 40°C and pH 4.0. After about 2.5 hours, the nickel spacers are ready.

But electroforming replica gaskets is not our current development direction. We are developing a new technology that does not use nickel, and we are moving in an environmentally friendly direction, which is NIP (No Ink Printing Packaging).

Step 3, install the holographic master onto the holographic embossing equipment, which will heat-press and copy the holographic image onto the high-quality PET material. Our company has an embossing machine that can perform two-color printing and positioning printing to protect the area that needs to be positioned to remove metal.

The fourth step, the glue applicator, with the help of the glue applicator, apply water-based glue, silicone oil, and hot melt glue on the hologram. At the same time, the holographic sticker will be laminated with the silicon paper.

The fifth step, the automatic die-cutting machine is used to cut the rolls with blank PSA holographic stickers or printed labels. Ideal for die cutting laser stickers with cursors and trips.

Used in conjunction with a slitting machine, it can slit the self-adhesive, especially suitable for holographic self-adhesive slitting after automatic die-cutting. They can die cut holographic stickers into rolls or sheets upon specific request.

The sixth step, other special treatments for different requirements and higher safety functions, including safe UV ink printing, demetallization treatment, special coatings, etc.