Metal Logo Electroform Copper Nickel Plate

Metal Logo Electroform Copper Nickel Plate

The type of Electroforming

Electroformed metals are usually copper, nickel and iron, also ues  gold, silver, platinum-nickel-cobalt, cobalt-tungsten sometimes, but nickel electroforming is the most widely used. The thickness of the electroformed nickel sticker is usually 0.06~1mm.The dimensional error between the electroformed part and the original mold is only a few microns.

What is Electroforming of metal logo electroform copper nickel plate?

Electroforming is the process of electrodeposition and separation on mandrels to make (or replicate) metal products. Electroforming is the same as electroplating. The difference is that electroplating requires a solid metal coating to be combined with the substrate for protection and decoration purposes. When the electroforming layer on the cathode conductive mold gradually increases and reaches the required thickness, the electroforming is stopped, the electroforming part is separated from the original mold, and the electroforming part opposite to the surface of the original mold is obtained. The shape and surface roughness of the electroformed sheet is similar to the original mold.

The process of metal logo electroform copper nickel plate is relatively simple: it is produced by electroforming method, no mold is needed, and only one film is needed for the whole production process. Saving money and time. The production of samples can be arranged on the day of payment, and the production time of the sample only 2-3 days.

Application

Production Process

Our Sample Room