If you don't know, look it up!
The functional play and external appearance of mechanical signs are closely related to the installation method. The installation method is roughly divided into the following types according to the installation foundation and production process:
1. This method of sticking is widely used, and the adhesives used include glass glue, AB glue, foam glue, all-purpose glue, sponge glue, double-sided glue, chloroform, structural glue, etc. According to the different materials and foundations, the length of use time, the difference in the installation environment, indoor and outdoor dry and wet, temperature difference and other conditions, choose the appropriate adhesive.
2. Hanging fixed type This is the method used for some folded logos, which are large in size, heavy in weight, and cannot be installed with foam filling and pasting. First determine the punching point, punch the hole with an impact drill, screw on the rubber plug and self-tapping screw, when only one screw is used, the hole must be punched along the middle part of the logo to keep it level, and then hang the logo folded on the screw After adjusting the position, seal the glass glue around it to fix it.
3. The prosthesis paste hanging type is also used for some folding marks. For example, when the wall foundation is marble, glass, stainless steel, etc., it is not allowed to punch holes, and it is relatively strong and flat. This method is more suitable. First measure the position, use AB glue to stick organic edge strips or angle aluminum and other materials on the wall, then hang the logo fold, fine-tune the position, and fix it with glass glue.
4. The hanging chain materials used in this method mainly include iron chains, steel cables, fish wire, cable ties, etc., and appropriate hoisting materials are used according to the indoor and outdoor environment, the weight of the sign and other special requirements.
5. Pull-and-explode screw fixation This method is suitable for situations where the ground foundation is a concrete structure and the sign does not need to be moved, such as street signs and parking lot signs.
6. The landfill type is suitable for the situation where the ground is a soil structure and the marking does not need to be moved. According to the size and height of the marking, determine how much concrete to use for the size of the digging hole. During construction, pay attention to the surrounding environment. After the marking is completed, the site must be cleaned. Restore flowers and plants and water them without damaging them.
7. Floor type According to the design requirements, the logo can be placed in the corresponding position.
8. This method of decorative screw fixing is designed in advance, and the design draft has been clearly indicated. Generally, this method is mostly used in acrylic clip paintings. If the positioning of the screws must be accurate, otherwise it cannot be installed correctly. The above is the content shared with you today, I hope it will be helpful to you.
