3D Dome Coating Epoxy Stickers Labels

Dome stickers 31

Dome stickers 32

Dome stickers 33

Dome stickers 34

How to make 3D Dome Coating Epoxy Stickers Labels？

To make a crystal plastic sign with a thickness greater than 2mm, it can be divided into two drops of plastic, after the first drop of plastic, cure for -5 hours, and then add another layer.

Cleaning after dripping, (using toluene, xylene, cyclohexanone) the container must be cleaned, if the glue is hardened, it is insoluble in any solvent, so the machine and the container must be cleaned before it hardens.

Precautions

1. Use and storage should avoid direct sunlight and exposure to high temperature to prevent jelly. It is generally stored in a cool and dark place at 25°C, especially in summer, it is best to store at low temperature.

2. The storage period of crystal glue is generally 6 months, and it can still be used with good performance after 6 months.

3. When using the configured crystal glue and encountering the remaining glue, do not pour it back into the original unpackaged package to avoid reaction.

cause jelly phenomenon.

4. Acetone can be used for syringes, beakers and other containers. Alcohol cleaning.

5. Attention in use: Do not add other diluents when mixing glue, so as not to reduce the strength.

Different Bases for you to choose